FENIX PD32 REVIEW

FENIX PD32 REVIEW:

BACKGROUND

My first 'expensive' flashlight I ever bought happened to be a Fenix L0D Q4 (a AAA keychain light).  At that time spending $50+ on a flashlight was a huge investment for me, but having bought some budgets flashlights that failed far too easy, I felt it was worth paying more for something that would last.  Being happy with the robustness and quality of this flashlight, I soon followed up with buying a Fenix L2D Q5. 

Fenix has recently release a new flashlight to the market, the Fenix PD32.  With the release of this flashlight, Fenix had a competition offering samples of the PD32 for review.  I was lucky enough to be selected to review the flashlight, though it did take some time for my sample to arrive. 

Since Fenix was one of my first quality flashlights, I do have a soft spot for their lights.  Nevertheless, I'll do my best to provide an honest and non-biased review on the Fenix PD32.


SPECIFICATIONS (FROM THE MANUFACTURER'S WEBSITE)

• Cree XP-G (R5) LED with a lifespan of 50,000 hours
• Uses two 3V CR123A batteries (Lithium) or one 18650 rechargeable battery (Li-ion)
• 127mm (Length) x 25.4mm (Diameter)
• 61-gram weight (excluding batteries)
• Digitally regulated output - maintains constant brightness
• Reverse polarity protection, to protect from improper battery installation
• Over heat protection to avoid high-temperature of the surface (turbo drops down to high after 30 minutes)
• Anti-roll, slip-resistant body design
• Tactical tail switch with momentary-on function
• Side switch in the head
• Made of durable aircraft-grade aluminum
• Premium Type III hard-anodized anti-abrasive finish
• Toughened ultra-clear glass lens with anti-reflective coating

Cost: ~$70USD  (Give or take a few dollars)

PACKAGING AND ACCESSORIES

The version of the Fenix PD32 I received was a prototype sample, so the packaging was more rudimentary.  There were no accessories included and the manual was a photocopy on plain A4 paper.   According to the information included with the prototype sample, the proper packaging should come with a clip, spare o-ring and rubber switch boot.  (N.B. according to the actual fenix website, a holster and lanyard should also be included with the Fenix PD32)

Packaging for test sample

DESIGN AND BUILD

The head of the Fenix PD32 has a crenulated bezel.  A minor benefit that I've noticed from having these crenulations, are they let light through when standing it with the head down.  This lets you know if you've accidentally left it on in this position.  The crenulations are not too aggressive and civilian friendly.

Crenulations allow light through while the flashlight stands with the head down

At the base of the flashlight head there is an anti-roll ring.  This does an adequate job of stopping the light from rolling on a flat level surface.  However, I do find if the surface is at a slight angle, the flashlight can still have a tendency to roll downwards.

Anti roll ring

This light has a smooth reflector.  This obviously will affect the beam characteristics which will be mentioned later.

Smooth reflector. Cree XP-G R5 LED emitter

 
There is knurling present on the body and tail-cap.  The knurling on the body provides 'grippiness' when generally holding the flashlight.  The knurling on the tailcap is well placed, providing grip when unscrewing the tail-cap to change batteries.  The knurling on Fenix PD32 is slightly on the aggressive side, but no overly so.

Knurling on the body and tail-cap

The tail-cap has a forward clicky that provides a momentary on.  As with most forward clickys the rubber button is slightly protrusive.  The tailcap is also scalloped on two sides to allow better access to the rubber button.  Unfortunately due to the protrusive button, this flashlight does not tailstand.

Protrusive rubber button.  Tail-cap scalloped to allow easy access to switch

 Also at the tail-cap are two lanyard holes.  Unlike some other flashlights I have come across, these lanyard holes are nice and wide, and fit a standard lanyard strap easily.

Hole for lanyard strap.  There is another lanyard hole on the opposing side.

 The button at the tail of the light is used to turn the light on and off.  On the side of the flashlight, near the head there is also a grey button.  This grey button is used to switch between the various modes of the light.

Grey side button

 The Fenix PD32 unscrews into a head, body and tailcap.  Joining these sections are nice thick square threads.  The various sections of the flashlight engage together easily, with no chance of cross-threading.  The threads are also annodised, allowing you to 'lock-out' the flashlight.

Nice thick square threads and black o-rings on either end of the body section. 

There are nice thick o-rings at either end of the body section.  These o-rings help to prevent the ingress of dust and water.

The Fenix PD32 is rated as waterproof to the IPX-8 standard.  To provide cooling for the light during some runtime tests, I dunked the flashlight in a glass of water.  While this is not same as testing it to IPX-8 standards, I can say over the two hours it was running, there was no ingress of water.

Fenix PD32 submerged in a glass of water

 
In terms of size the Fenix PD32 is moderately compact for 1x18650/2xCR123 sized lights.  However if size is major factor for you, there are smaller 1x18650/2xCR123 lights around.  Personally, I still find the Fenix to be a little too large to carry around in my pockets.

The following picture gives you and idea of size in comparison to some other 18650 flashlights I have.

From the left: Armytek Predator, Ultrafire 504B, Fenix PD32, MG L-mini II, Zebralight sc600w

 USER INTERFACE AND OUTPUTS

The Fenix PD32 has 4 outputs in it's general mode and 2 hidden flashing modes.  Outputs and times reported by the manufacturer are as follows:
Turbo - 315 lumens - 2 hours
High - 130 lumens - 8 hours
Mid - 70 lumens - 16 hours
Low - 9 lumens - 200 hours
Strobe - 315 lumens - ? no data provided on runtime
SOS - 130 lumens - ? no data provided on runtime

The runtimes were based on using 2xCR123a batteries.  Do note, the runtime for turbo is an acculumated runtime; it will not run for 2 hours non-stop without manual intervention.  This is because, when using the turbo mode, it will automatically drop down to high after 30 minutes of usage.  This a feature to prevent overheating of the flashlight.

As mentioned previously the button on the tail of the flashlight is used to turn the light on and off.  The tail switch is a forward clicky that provides 'momentary on'.  This means if you half depress the rubber button, the flashlight will turn on whilst the button is half depressed.  As soon as you let go of the button, the light will turn off.  If you want to leave the light on, just push the button all the way down until it clicks and it will remain on.

To switch between modes, you click the grey side button whilst the light is already turned on.  It will cycle from low -> medium -> high -> turbo -> back to low.  This flashlight will remember the last general mode used (it will not remember any flashing modes).  So the next time you turn on the flashlight, it will light up at the last output used.

To access the strobe, you need the hold down the side button for one second, whilst the flashlight is turned on.  The strobe is a random strobe that switches between various frequencies in how fast in flashes.  To access the SOS mode, you need hold down the side button for around 3 seconds.  If you want to switch back from the flashing modes to the general output modes, either click the side button once, or turn the light off and on again at the tail-cap.

The Fenix PD32 can run on the following battery configurations:
-Non-rechargeable 2xCR123A (3.0V nominal voltage per cell)
-Rechargeable 1x18650 li-ion (3.7V nominal voltage)
-Rechargeable 2x16340 LiFePO4 (3.2V nominal voltage per cell)

It is NOT recommended to used 2x16340 li-ions (3.7V nominal voltage).  Fenix also recommend using 1x18650 li-ion with caution.  I believe this is because of the potential dangers of using li-ion batteries.  I am not 100% sure but I do not think this flashlight has overdischarge protection for li-ion batteries.  I was able to run down a 18650 li-ion down to 3.06V. I believe the light would have discharged the battery further, but I discontinued the test at this point.


BEAM CHARACTERISTICS

The fenix PD32 has a fairly pronounced hot spot.  The central zone of the hot spot is slightly darker than the outer edge of the hot spot.  There are some rings in the beam, though this is not unusual considering it uses a smooth reflector.  Personally I don't find the rings in this flashlight too distracting.

I wouldn't consider the Fenix PD32 a throw based flashlight, however for a flashlight of this size, it is more on the throwy-side, as it has a fairly intense hotspot.

The tint in my sample is a nice clean cool-white when run on turbo.  On the lower levels there is a slight hint of green.  In current controlled lights it's not unusual to see a shift in tint at different drive levels.

Beamshots @ ~5m.  From the top:  Fenix PD32, Ultrafire 504B, Armytek Predator.  The armytek predator is considered a thrower, and you can notice the more intense hotspot.  The Ultrafire 504B is more floody.  The Fenix PD32 is somewhere in between.

 

 

Beamshots underexposed so you can better see the characteristics of the hotspot.  Order is same as the last set of beam shots

 

Outdoor beamshots.  Same order as the first set of beamshots.

 

 

CONSTRUCTIVE CRITICISM

There's really not a lot to criticise about the Fenix PD32, but there a few things I would like to see improved.

As mentioned previously the anti-roll ring does not work so well if surface is not flat and level.  Perhaps the ring could be modified slightly, to reduce the tendency to roll on an inclined surface.

I like using the 1x18650 li-ion format, as they are rechargeable and energy dense.  I would like confirmation on whether there is overdischarge protection when using 18650 batteries.  I have not read any where that there is overdischarge protection, so I assume it is not present.  In my tests, I managed to discharge a battery to 3.06V, which is considered overdischarged by most standards.  I feel overdischarge protection is important in flashlights that use li-ion batteries.

With presence of a forward clicky and a randomised strobe, I get the feeling that the Fenix PD32 is targeted towards law enforcement officers and military personnel.  The presence of a randomised strobe could be useful for such personnel, however, I assume they would want instant access to strobe.  In this flashlight, the light much first be turned on tailcap, before the strobe mode can be activated.  If you were going to use the strobe tactically to disorientate your target, I assume you would want to switch from off to strobe, instantly.

Myself, as a general-user, I would have preferred an light with a retruded tail button that allows the flashlight to tailstand.  However it is hard to cater for and satisfy everyone in the market.  I understand, having a retruded rubber button at the tailcap, would make it harder to use the momentary feature... and more so if you need to wear gloves.

Another personal preference, would like to see in the Fenix PD32, would be having a lower low mode.  The current low mode is fairly bright.  The difference between medium and high are not that pronounced.  If you are dropping the low mode, I would also consider dropping the medium mode too. 

CONCLUSIONS

I have to say, I quite like the Fenix PD32.  Though you can get smaller lights in the category, the Fenix is not overly large and does fit the hand comfortably.  I feel the UI is fairly easy to understand, especially compared to some previous generations of Fenix lights. (where there is a need to tighten/loosen the head for different mode lines and then half click the tail button to switch between outputs in that mode line)

I guess whether this light is right for you depends on what you are after.  If these following points suit you, then it would be a good flashlight to consider:
-if you want a light that has memory and remembers the last mode used
-if it's important for you to have a light with momentary-on, with a button that can be easily used with gloved hands
-you want something that is not overly large
-if you want a light that has a combination of flood and throw, with a tendency to having slightly more throw.
-you like to have strobe and sos modes, but prefer to have them hidden away.

It might not be for you if:
-if you want a light that has a lot of throw
-if you want a light that has a lot of flood
-if you want a light that can tail stand
-if you prefer a light without memory.  (Some people prefer the light to start up at the same mode, no matter what it was last used for.  It comes down to predictability)
-if you need instant access to strobe
-if you want a flashlight with absolutely no rings in the beam, and a smoother transition from hotspot to spill
-if you want a light with a lower low mode

LINKS

Fenix Website:  http://www.fenixlight.com/viewproduct.asp?id=155

ADDITIONAL PHOTOS

Inside shot of the flashlight head

Inside shot of the tail cap

Keychain Pen Review; Picopen vs Telepen

KEYCHAIN PENS:

Tec Accessories Pico Pen vs True Utility Telepen

I've had the tec accessories picopen for a little while now and I've been meaning to compare it to my other keychain pen; the true utility telepen (reviewed here).  Here are some of the differences, that I note.

Above: True utility telepen, Below: Tec accessories picopen

PACKAGING

The tec accessories pico pen comes nicely packaged in a metal box.  Included in the box is a bunch of accessories including: a gate clip, small split ring, wire cable keychain, stylus/pda insert and instruction manual/information card.

Pico pen with included accessories, packaged in a rectangular metal tin

The true utility telepen comes in a clamshell packaging.  Between the two, I feel the pico pen looks better when giving it as a gift.  The added accessories and better packaging makes it look classier.


SIZE AND SPECIFICATIONS

Both pens are comparable in size.  The tec accessories pico pen is slightly longer, but is also slightly slimmer than the telepen.

 
COST

True Utility Telepen: GB £4.99
Tec Accessories Picopen: US $19.95

Using the current coversion rates, the telepen is less than half the price of the picopen.


BUILD QUALITY

The tec accessories picopen feels solid and well made, I haven't noticed any issues in build quality during my time with this pen.  With the telepen, I do note there is some wobble and play in the telescoping segments.  Also, as mentioned in the telepen review, I had some issues taking out the refill catridge.  Neither are huge issues, but something to point out.

It may be that their range is smaller and simpler design, but in general I find the build quality of items from tec accessories to be pretty good (e.g. the p7 suspension clip and glow fob).  I find some of the stuff from true utility can sometimes be a mixed bag.  The Firestash I have, has since come apart and I can not get the wick back in.

Having said that, true utility's offerings usually come at a fairly affordable price. And, if anything does go wrong, I have read on some forums, they have pretty good customer service.

USAGE

When actually using these pens, I prefer the feel of the true utility telepen.  The telescoping ability of the telepen makes it more versatile, allowing you to adjust the length.  The width of the telepen is also controllable, to a certain degree.  I find the the pico pen a little too small and thin to grasp comfortably.  For me, the picopen would be a last resort writing utensil.

OTHER

Both these keychain pens can use normal pen refills.  You can also buy official pico pen refills, which are stainless steel (instead of the usual plastic refills).

The pico pen comes with a stylus/pda insert, which can be used instead of the pen cartridge.  I don't have any pda's to test it on, but it doesn't work with my current smart phone.

One downside I find with the tec accessories pico pen, is the magnet in the keyring attachment.  This magnet does the job of holding the pico pen firmly in place.  However, I find the magnet also attracts other metal components on my keyring.  These components (such as split rings, clips and snap gates), annoyingly, get stuck to the keyring attachment.  I'd also be concerned about keeping the magnet near magnetically sensitive objects like credit cards.

There is a magnet in the keyring attachment of the pico pen

CONCLUSIONS

Given a choice between the two, I would prefer the carry the true utility telepen on my keyring.  I find the tec accessories picopen more difficult to use, and I am not a fan of magnetic attachment.  The picopen does make good gift, presentation-wise.

In future I hope to try the valiant concepts keychain pen.  Once again, the smaller size may make it more difficult to use than a telepen, but I would like to test out a keychain pen that uses a Fisher ink cartridge.  These ink cartridges are meant to write on more surfaces, as well as upside down.


LINKS

http://www.trueutility.com/pocket-tools-store/telepen.html
http://www.tecaccessories.com/products/product.php?II=13

True Utility TelePen Review

"As I swipe my credit card to pay for my groceries, the obviously sick cashier coughs and splutters into her hand.  With her germ ridden hands, she kindly proffers her pen to me so I can sign the credit card receipt.  Having no pen of my own, I have to accept the pathogen-covered utensil, sign the receipt and finish my transaction."

I know this makes me sound like a germo-phobe (I'm not), but the situation above, has made me consider adding a pen to my keychain.  Pens always seem to go missing, sometimes they can't be found when you really need one.  Having a back-up pen on your keychain, can certainly be useful at times.

In the past few weeks, I have added the True Utility TelePen to my keychain.  I originally bought this pen with my keytool order; it was not overly expensively and I was open to giving it a try.

While I have been very critical of the keytool, I feel that True Utility Telepen has hit the right notes with me.

When closed the telepen is relatively inconspicuous measuring only 50mm x 5mm (~60mm with keyring attachment).  It can be extended like a telescope, up to 115mm in length.  You can choose not to have the telepen fully extended and use it with some of the segments pushed back in.  As you push in the telescopic segments, you get more width to hold the pen.  Personally, I prefer to use the telepen with one segment pushed in.  I find this provides a good balance in term of length and width, for holding the pen (in my hands). 

 The True Utility Telepen needs firm pressure to take it in and out from it's key ring attachment.  While this means it is slightly more difficult to take out for use, it is also unlikely to accidentally fall out from the key ring attachment.

Keyring attachment, refill cartridges, telepen

With the packaging, the True Utility Telepen, comes with three black ink refills.  When these run out, you can replace them with a standard ballpoint pen refill (cut down in length).  This is great, in that you do not have to worry about sourcing specialised cartridge refills, or worry about refills if the manufacturer stops making the item.

It may have just been my sample, but I had a lot trouble removing the original ink cartridge.  In the end I had to pry it out with a small screwdriver, and ended up ruining the ink cartridge.  I have since put in one of the replacements... however, the replacement also feels like it will be difficult to take out.  I guess if I use up all the ink in the cartridge, it will not be an issue if I ruin the cartridge when removing it.

At GB £4.99, the telepen is affordable and less expensive than some other alternatives which are out there.

I have to say the True Utility Telepen was a surprise for me, I did not have high expectations for it.  I would not recommended it for extended use, but it is perfect for signing receipts, jotting down phone numbers or scribbling a few notes.  Great as a back-up pen.

I have only had the telepen on my keychain for a few weeks, but I have a feeling this may stay on my keychain permanently.

Specifications:

Material: Stainless Steel
Colour: Silver
Size: L50 (closed) L115(open) x W5mm
Weight: 14 grams
Included:  3 Refills (black ink), Split Ring, Key-ring Attachment
Cost: GB £4.99

Manufacturer's Website: 
http://www.trueutility.com/pocket-tools-store/telepen.html

Some alternatives to consider:
Valiant concepts keychain pen - comes in stainless steel or titanium.  Uses special pressurised cartridges.  These cartridges can write on various angles and on more surfaces.  May have issues if maker stops manufacturing the cartridges.  Significantly more expensive than the telepen.
TEC accessories pico-pen -  more expensive.  Longer in length
Inka pen -  uses pressurised cartridges.  Significantly larger.

Additional Photos: